NETDI: “DEVICE=C:WINDOWSsetver.exe”NETDI: ClassInstall(0xa) endNETDI: ClassInstall (0xc on 0x3506:0x58)

NETDI: “DEVICE=C:WINDOWSsetver.exe”NETDI: ClassInstall(0xa) endNETDI: ClassInstall (0xc on 0x3506:0x58)

NETDI: ClassInstall (0x6 on 0x3506:0x58) on at EnumRootNet000NETDI: SetupFlags=51F(SUF_INSETUP)(SUF_FIRSTTIME) BootCount= NetSetupFlags=0 (RETAIL)NETDI: Examining class NetNETDI: dif_FirstTimeSetupNETDI: Setting FirstBootUpgrade=1NETDI: ChangeLine: No matches found.NETDI: File Information for C:WINDOWSSYSTEMwsock32.dllNETDI: File not foundNETDI: File Information for C:WINDOWSWINSOCK.DLLNETDI: File not foundNETDI: File Information for C:WINDOWSSYSTEMWINSOCK.DLLNETDI: File not foundNETDI: VxdWinsockIrSockets=wsirda.vxdNETDI: File Information for C:WINDOWSSYSTEMwsirda.vxdNETDI: File not foundNETDI: BackupWSock: Clean install, exitingNETDI: DetectWSock=0NETDI: Installing WS2 in the standard locationsNETDI: QueueNdiFileCopy: C:WININST0.400wsock32.dll->(LDID 11)wsock32.dllNETDI: QueueNdiFileCopy: C:WININST0.400winsock.dll->(LDID 25)winsock.dllNETDI: Batch.Display=1NETDI: SelectMyBestCompatDrv: Found a compatible driver: Dial-Up AdapterNETDI: ClassInstall(0x6) endNETDI: NETDI: lpRegLogConf = 0x0NETDI: ClassInstall (0x9 on 0x3506:0x58) on at EnumRootNet000NETDI: SetupFlags=51F(SUF_INSETUP)(SUF_FIRSTTIME) BootCount= NetSetupFlags=7 (RETAIL)NETDI: ClassInstall(0x9) endNETDI: ClassInstall (0xa on 0x3506:0x58) on at EnumRootNet000NETDI: SetupFlags=51F(SUF_INSETUP)(SUF_FIRSTTIME) BootCount= NetSetupFlags=7 (RETAIL)NETDI: ProcessNdiFileQueue: C:WININST0.400wsock32.dll -> C:WINDOWSSYSTEMwsock32.dll copied fileNETDI: ProcessNdiFileQueue: C:WININST0.400winsock.dll -> C:WINDOWSwinsock.dll copied fileNETDI: ChangeLine: No matches found.NETDI: AddRemoveSetVer fAdd=1NETDI: ChangeLine: Adding line “DEVICE=C:WINDOWSsetver.exe”NETDI: ClassInstall(0xa) endNETDI: ClassInstall (0xc on 0x3506:0x58) on at EnumRootNet000NETDI: SetupFlags=51F(SUF_INSETUP)(SUF_FIRSTTIME) BootCount= NetSetupFlags=7 (RETAIL)NETDI: ClassInstall(0xc) end****** BEGIN NEW RECORDING ***** NETDI: ##################################################NETDI: EnumComplete StartNETDI: SetupFlags=50F(SUF_FIRSTTIME) BootCount=1 NetSetupFlags=7 (RETAIL)NETDI: ExecuteQueuedAPIsNETDI: NdiWSCDeinstallProvider(FF017DE1) Result=-1, Errno=10014NETDI: NdiWSCInstallProvider(FF017DE1, C:WINDOWSSYSTEMmswsosp.dll) Result=0, Errno=0****** BEGIN NEW RECORDING ***** NETDI: SetupFlags=50E BootCount=2 NetSetupFlags=7 (RETAIL)NETDI: VerifyCabsAvailable: Not network install, no need to verifyNETDI: ClassInstall (0x18 on 0x240e:0x58) on at EnumROOTNET000NETDI: SetupFlags=50E BootCount=2 NetSetupFlags=7 (RETAIL)NETDI: ExecuteQueuedAPIsNETDI: ClassInstall(0x18) endNETDI: ClassInstall (0x2 on 0x240e:0x58) on at EnumROOTNET000NETDI: SetupFlags=50E BootCount=2 NetSetupFlags=7 (RETAIL)NETDI: Examining class NetNETDI: Found EnumRootNet000 in registryNETDI: GenInstallDriver, C:WINDOWSINFNETPPP.INF,PPPMAC.ndiNETDI: GenInstallDriver, C:WINDOWSINFNETPPP.INF,PPPMAC.ndiNETDI: GenInstallDriver, C:WINDOWSINFNETPPP.INF,PPPMAC.ndiNETDI: NdiCreate(Dial-Up Adapter) OKNETDI: Batch.*PNP8387.Logging no entry in the batch fileNETDI: Batch.*PNP8387.IPXHeaderCompression no entry in the batch fileNETDI: Batch.*PNP8387.PointToPointIP no entry in the batch fileNETDI: Batch.*PNP8387.IPMTU no entry in the batch fileNETDI: Validating Dial-Up Adapter at EnumROOTNET000, rc = 0x0NETDI: GenInstallDriver, C:WINDOWSINFNETPPP.INF,PPPMAC.InstallNETDI: GenInstallDriver, C:WINDOWSINFNETPPP.INF,PPPMAC.Install.WSock2NETDI: ChangeLine: No matches found.NETDI: ConfigureSetVer calledNETDI: AddRemoveSetVer fAdd=0NETDI: RemLine: Deleting “DEVICE=C:WINDOWSsetver.exe”NETDI: ClassInstall(0x2) endNETDI: ClassInstall (0xc on 0x240e:0x58) on Dial-Up Adapter at EnumROOTNET000NETDI: SetupFlags=50E BootCount=2 NetSetupFlags=3 (RETAIL)NETDI: ClassInstall(0xc) endNETDI: ClassInstall (0x18 on 0x240e:0x58) on PCI Ethernet Controller at EnumPCIVEN_10B7&DEV_9006&SUBSYS_900610B7&REV_04BUS_00&DEV_0D&FUNC_00NETDI: SetupFlags=50E BootCount=2 NetSetupFlags=3 (RETAIL)NETDI: ClassInstall(0x18) endNETDI: ClassInstall (0x2 on 0x240e:0x58) on PCI Ethernet Controller at EnumPCIVEN_10B7&DEV_9006&SUBSYS_900610B7&REV_04BUS_00&DEV_0D&FUNC_00NETDI: SetupFlags=50E BootCount=2 NetSetupFlags=3 (RETAIL)NETDI: Examining class NetNETDI: Found EnumRootNet000 in registryNETDI: NdiCreate(Dial-Up Adapter) OKNETDI: GenInstallDriver, C:WINDOWSINFNETEL90X.INF,PCIEL9006TPC.ndiNETDI: GenInstallDriver, C:WINDOWSINFNETEL90X.INF,PCIEL9006TPC.ndiNETDI: NdiCreate(3Com EtherLink XL TPC 10Mb Ethernet NIC (3C900B-TPC)) OKNETDI: Batch.PCIVEN_10b7&DEV_9006.media no entry in the batch fileNETDI: Batch.PCIVEN_10b7&DEV_9006.IOAddress no entry in the batch fileNETDI: Batch.PCIVEN_10b7&DEV_9006.Interrupt no entry in the batch fileNETDI: Batch.PCIVEN_10b7&DEV_9006.BusNumber no entry in the batch fileNETDI: Batch.PCIVEN_10b7&DEV_9006.slot no entry in the batch fileNETDI: Batch.PCIVEN_10b7&DEV_9006.NDIS_VERSION no entry in the batch fileNETDI: Validating 3Com EtherLink XL TPC 10Mb Ethernet NIC (3C900B-TPC) at EnumPCIVEN_10B7&DEV_9006&SUBSYS_900610B7&REV_04BUS_00&DEV_0D&FUNC_00, rc = 0x0NETDI: Validating Dial-Up Adapter at EnumRootNet000, rc = 0x0NETDI: Copying files for section EL90x.ndis3